Microwave Source Specification Matrix

P/N

Outline

Frequency

Supply

Ouput

Harmonics

Sub Harmonic

Frequency Stability

Series

(LxWxH)

Range

Voltage

Power

Response

Response

-20 to 70°C

400

5.13"x3.75"x2.0"

1GHz to 18 GHz

15 VDC

to 20 dBm min.

-50 dBc

-50 dBc

±10 PPM

500

2.0"x2.0"x.1.5"

125 to 600 MHz

12 to 15 VDC

to 13 dBm min.

-30 dBc

-30 dBc

±10 PPM

500H

2.0"x2.0"x.1.5"

126 to 600 MHz

12 to 15 VDC

to 13 dBm min.

-30 dBc

-30 dBc

±3 x 10^-7

4200

  4.88"x1.35"x1.05"

1.1 GHz to 6 GHz

15 to 24 VDC

to 13 dBm min.

-60 dBc

-60 dBc

±10 PPM

4000

400 MHz to 1.1 GHz

Nominal Specs

Phase Noise Performance

Noise @ Fo

100 Hz

1 kHz

10 kHz

100 kHz

Spurious:

-90 dBc maximum

400@9.7 GHz

-82 dBc/Hz

-112 dBc/Hz

-127 dBc/Hz

-131 dBc/Hz

EFC input Impedance:

10 kHz minimum

500@400 MHz

-110 dBc/Hz

-140 dBc/Hz

-152 dBc/Hz

-153 dBc/Hz

Electrical Freq Adjust / Slope:

+/-6 volts / negative

500@600 MHz

-110 dBc/Hz

-140 dBc/Hz

-152 dBc/Hz

-153 dBc/Hz

0 to 10 volts / positive

4100@1.6 GHz

-100 dBc/Hz

-130 dBc/Hz

-140 dBc/Hz

-143 dBc/Hz

Sufficient electrical and / or

mechanical adjust to

Note:

Actual phase performance may vary

compensate for 10 years aging

SMA (F)

Supply connectors:

Filtercon

                                                                                                          All models and specifications subject to change without notice.

                         REVISED         11  Nov.  2004