 |
The
2000 provides a cost effective, low phase noise, phase lockable,
crystal controlled oscillator with a small footprint. The unit is
available with or without EFC and mechanical tuning. A +5 volt supply
is optional.
 View
Outline Drawing |
| Size:
1” x 1” x 0.5” (24mm x 25mm x 13mm) |
| Voltage
Controlled Crystal Oscillator 40 to 125 MHz |
| |
Phase
Noise:
typical at 100 MHz |
100
Hz
1 KHz
10 KHz
100 KHz |
-122
dBc/Hz
-154 dBc/Hz
-167 dBc/Hz
-170 dBc/Hz |
| Output
Power: |
+13
dBm into 50 ohms |
| Temperature
Range: |
0°
to 70° C |
| Frequency
Stability vs. Temperature: |
±5.0
PPM over 0°C to +70°C
±5.0 PPM over -20°C to +70°C
±10.0 PPM over -40°C to +70°C |
| Harmonics: |
-30
dBc |
| Spurious: |
-90
dBc |
| EFC
Tuning Voltage: |
±
6 VDC |
| EFC
Tuning Range: |
±8
PPM |
| EFC
Impedance: |
10
K ohms |
| Tuning
Slope: |
Negative |
| Mechanical
Tuning: |
Sufficent
to Compensate for Aging |
| Supply
Voltage: |
+12
to +15 VDC |
| Power
Consumption : |
<.5
watts |
| Connectors: |
0.030"
dia. Solder Pins |
| Options |
+5
VDC Supply Voltage (Nominal specifications will vary for units with
lower supply voltage)
Positive Tuning Slope 0 to +10 volts
|
| All
specifications contained within are representative of typical TCI
product. Consult a TCI sales representative for product specific
parameters. |
